Make several passes to create a clean shine, using overlapping motion. Use a smooth left to right polishing motion. The shine is created by letting the buffing compound do the cutting and polishing, not by how much pressure is applied against the metal surface. Use TR-2 Brown Tripoli or Green Chrome rouge and Yellow Airway Cutting Wheel. The rouge bar should be placed on white paper or cloth to keep it clean. Touch the rouge bar with the outside edge of the rotating buffing wheel until the rouge adheres to the wheel. Step3: START THE POLISHING PROCESS (CUTTING)įor safety purposes, hold the rouge bar down firmly on the ground with your foot. The White Chrome Rouge Bar is used for a final finish, high luster, stainless, and aluminum. The Green Chrome Rouge Bar is used for secondary cutting, semi-final finish, stainless and aluminum.
The TR-2 Brown Tripoli Rouge Bar is used for primary cutting stainless and aluminum. The 87 Stainless Rouge Bar is used for heavy cutting iron, steel, aluminum, and stainless. Use the flathead bolt and a 3/8” hex wrench to securely tighten the safety flange assembly and Airway Buffing Wheel to the extender and machine spindle.įor safety, always wear a respirator and face shield or goggles. Place the concave washer, flat side down, into the recess of the concave flange. Place the concave flange over the Airway Buffing Wheel so that the raised part of the flange fits into the hub of the buffing wheel. Place the Airway Buffing Wheel on the flat flange.
Lay the flat flange on the end of the extender. Make sure the extender is securely tightened on the spindle. Screw the threaded extender onto the machine spindle. Always use safety flanges with any buffing wheel that has a metal center plate.
0 kommentar(er)
